Drilling of idlers and channels
Structural rollers type "C" “Z” rollers on request from 4” x 2”
Code Dimensions in inches/mm Caliber kg/m kg/pc pcs/pack Length in meters kg/pack Finish
C0315
3” x 1.5”
(76.2 x 38.1) 		18* 1.6 9.4 48 6 452  N*/P*/G*
16 1.99 11.93 48 6 573 N*/P/G*
14 2.37 9.48 48 4 455 N*/P/G*
14 2.37 11.85 48 5 569 N*/P/G*
14 2.37 14.23 48 6 683 N*/P/G
C0415
4” x 1.5”
(101.6 x 38.1) 		18* 1.9 11.3 96 6 1,083 N*/P*/G*
16 2.4 14.3 96 6 1,377 N*/P*/G
14* 2.78 11.12 96 4 1,068 N*/P*/G*
14 2.78 13.9 96 5 1,334 N*/P*/G
14 2.78 16.69 96 6 1,602 N*/P/G
C0420
4” x 2”
(101.6 x 50.8) 		18* 2.1 12.6 96 6 1,210 N*/P*/G*
16 2.62 15.74 96 6 1,511 N*/P/G
14 3.16 12.63 96 4 1,212 N*/P/G*
14 3.16 15.79 96 5 1,516 N*/P/G*
14 3.16 18.95 96 6 1,819 N*/P/G*
C0515
5” x 1.5”
(127.0 x 38.1) 		14* 3.3 19.7 96 6 1,889 N*/P*/G*
12* 4.5 27.1 50 6 1,353 N*/P*/G*
10* 5.7 34.1 50 6 1,703 N*/P*/G*
C0520
5” x 2”
(127.0 x 50.8 		16* 3.1 17.8 96 6 1,709   N*/P*/G*
14 3.52 17.61 96 5 1,691 N*/P/G*
14 3.52 21.14 96 6 2,029 N*/P/G*
C0620
6” x 2”
(152.4 x 50.8) 		16* 3.23 19.38 96 6 1,860 N*/P*/G*
14 3.89 23.33 96 6 2,240 N*/P/G*
12 5.65 33.89 50 6 1,695 N*/P/G*
10 7.15 42.88 50 6 2,144 N*/P/G*
C0727
7” x 2.75”
(177.8 x 69.9) 		14 4.79 33.52 50 7 1,676 N*/P/G*
12* 7 48.8 50 7 2,441 N*/P*/G*
10* 8.9 62 50 7 3,098 N*/P*/G*
C0825
8” x 2.5”
(203.2 x 63.5) 		16* 4.2 33.4 50 8 1,668 N*/P*/G*
14* 5 40.1 50 8 2,004 N*/P*/G*
12* 7.3 58.2 50 8 2,330 N*/P*/G*
C0827
8” x 2.75”
(203.2 x 69.9) 		16* 4.4 34.4 50 8 1,720 N*/P*/G*
14 5.15 41.23 50 8 2,062 N*/P/G
12 7.5 60.04 50 8 3,002 N*/P/G*
10 9.53 76.27 50 8 3,813 N*/P
C1027
10” x 2.75”
(254.0 x 69.9) 		14 5.93 59.29 40 10 2,372 N*/P
12 8.57 85.66 40 10 3,426 N*/P
10 10.9 108.97 32 10 3,487 N*/P
C1235
12” x 3.5"
(304.8 x 88.9) 		14 7.21 86.48 30 12 2,594 N*/P/G*
12 10.41 124.9 18 12 2,248 N*/P/G*
10 13.38 160.59 18 12 2,891 N*/P

*On request. N=Black sheet. P=Painted sheet. G=Galvanized sheet. B=Green varnished galvanized sheet. Perfiles LM is not responsible for any misinterpretation or variations in these values. For the calculation and/or selection of materials to be used, a calculating engineer is suggested.

Galvasid

Our subsidiary company, Galvasid, offers a variety of coated steel corrugated sheets (galvanized, aluminum-zinc and painted), ideal for roofs, facades and mezzanines. We also have complementary accessories for different construction systems. Visit www.galvasid.com

Tecnológico de Monterrey

If you want information on the structural characteristics of our products, consult the study carried out by the Department of Mechanical Engineering of the Institute of Technology and Higher Studies of Monterrey.

Los polines estructurales se fabrican con lámina negra, pintadao galvanizada en calidad comercial o alta resistencia. www.perfileslm.com/tablas_itesm.pdf